The Strongest, Fastest, and Easiest Aluminum Fabrication or Parts Repair - no expensive equipment required.
Does The Impossible. Makes a sound joint with slight penetration to base metal that is stronger than mild steel. Join thick or thin parts with a 45,000lb tensile strength.
Extreme Performance.These Rods are engineered to easily flow under a very low working temperature to ensure fast application to your project with minimal distortion.
From Amateur To Pro.Regardless of your prior experience, anyone can weld aluminum without the need for expensive equipment like welding machines. All you need is a simple propane torch and some easy welding rods.
Thoroughly clean the area you’re about to weld by brushing the base with stainless steel brush until it becomes shiny.
Then evenly heat the area to be welded.
As you heat, rub the rod vigorously against the heated area until the rod starts flowing.
Caution:Never apply heat directly to the rodas it will crumb, and if you manage to melt the rod directly, the weld will be easily breakable. Remember, melting the rod directly is a wrong way, and makes crumby welds.
Melting temperature: < 896°F (480°C)
Application: Aluminum and aluminum alloy welding/brazing
Recommended for welding or brazing aluminum alloy: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005, and cast alloys 710.0 and 711.0
Excellent corrosion resistance.
Minimize parent material distortion during welding.